Replacement Window Handle
uPVC handles have spindles that work with the locking mechanism inside the frame. Over time, this could become loose or even break.
It is simple to replace a damaged window handle. Open the window and take off all screws (often hidden behind plastic caps). The spindle will then be revealed. You can cut it to the correct length.
What's the issue?
Over time, the window handle may begin to display signs that it's time to be replaced. This could be due to a variety of causes like overuse, aging and exposure to harsh environments such as freezing temperatures. If you find that your window handle has deteriorated or is no longer in good condition It's recommended to speak with a uPVC expert to find the right replacement for the specific kind of window.
Generally speaking, most types of uPVC windows are designed to be compatible with various handle variations and lock types. However, it is always a good idea to check with the experts at Truth hardware to find the right replacement handle for your specific casement or awning window. This will help ensure that the handle is fitted correctly and will provide you with an option that is both sturdy and secure.
If you discover that your window handle is equipped with an obstruction in the form of an iron "tongue" that stops the handle from rotating involuntarily, then it's important to understand that this is a safety feature that shields you and your family against accidental opening of the window at an unfavourable angle. The best way to avoid the risk of accidentally triggering the blocker is to simultaneously push the unlocker and seal of the window profile.
The lubricant inside your uPVC handle might have dried out. This is a frequent issue with uPVC handles as they can be exposed to elements for long durations of time, which may cause them to dry out. If you notice that your uPVC window handles aren't functioning properly, you could try re-lubricating the mechanism by applying some oil around the sash spindle as well as the worm gear (Photo 1).
Do I need a new lock?
Window handles are an integral component of windows as they help them open and close. Over time, window handles can be damaged or worn out, and require to be replaced. This is a simple and easy task.
There are numerous kinds of uPVC handles available, each with their own distinct function. The standard window handle is the most commonly used. It serves a basic function, allowing users to open or close a window. For upvc door handles -conscious homeowners with a desire to be secure, a lockable uPVC window handle is available. The handle can be locked using a a key to provide an extra layer protection and satisfy home insurance requirements in most cases.
There are also a number of variants that come with additional features. Some uPVC window handles have buttons that can be pressed to serve as a security device for children. This is a great option for families with young children, as it can aid in stopping children from opening the window in an attempt to escape.
There are many alternatives that can be utilized to increase the efficiency of energy use. This is because the handle of a window can be used to shut the window which reduces heat loss and keeps the interior of the house warmer.
No matter what kind of uPVC window handle is required, it is essential that the appropriate replacement be found in order to ensure a high level of functionality and safety. It is recommended to measure the spindle on the window handle to use it as a reference for the new handle. This will prevent the replacement from being too loose or displaced and causing more damage and security concerns.
What kind of lock and handle do I need?
Almost all uPVC windows are fitted with window handles. Since they are exposed to constant use, wear and tear, and sometimes the effects of intruders or the weather, they could get damaged and require replacement. However, before you rush out and purchase a new handle or lock, it's worth taking an examination to see what type of handle and lock you currently have. This will help to make sure you get the right replacement and will be an exact fit, preventing damage to your window and offering the highest security.
There are two main kinds of uPVC window handles and locks: espagnolette handles and cockspur handles. Both have a locking mechanism within the window frame. However they do this in different ways. Generally, handles made of espagnolette are fitted with a spindle which is inserted into the lock gearbox. The rods for the shoot bolt are then turned to open the window. They are typically used on tilt and turn uPVC Windows.
Cockspur handles On the other hand they have the lever that is attached to an elongated striker plate that is located on the inside of the window frame. These handles are usually found on older uPVC window frames and offer additional security since they lock at both the top of the frame as well as the bottom.
It's time to replace the handle and lock. To begin first, make sure the window is in the open position. Remove the screw on the top of the handle base. This will reveal two other screws that you can also take off. Once all the components of the old handle have been removed, it's simply a case of inserting the new handle, placing it correctly and screwing in the two remaining screws. Be sure to replace the screw cap caps if you have any.
Do I require a Cockspur?
The Cockspur handle is a handle with a spur or nose on the side that locks into a wedge within the window frame. These handles are used on older uPVC and aluminium windows.
The handles are simple to install, and you just fit them in the same way as you did with the old handle. You should test your new handle first, in the event that the spindle's location isn't the correct position. After you've completed this you can screw in the handle and attach a screw cap to the end of the spindle.
If you have a Cockspur style handle then it is important to determine the backset of your window which is the distance between the screw's base plate and the handle's underside. nose. This is also known as the 'nose' and it's an important measurement to determine the correct size of replacement handles.
You can change your window handles with different styles of. Espag handles are usually used on double-glazed windows that are of a newer generation. You can also pick from tilt and turn handles, spade handles, or monkey tail window handle options. These handles are compatible with either uPVC windows or aluminium ones.
Monkey tail handles are one of the most striking and attractive types of window handle and can be fitted to a variety of window styles, ranging from uPVC casement windows to timber sash windows. These handles are perfect for those who want to improve the security of their home without having to replace their entire window system. This type of handle is utilized in conjunction with a shotbolt and is extremely simple to use whether it is closed or open.
How do I change my window handle?
If you require a new window handle due to a breakage or to improve the appearance of your home, it's a simple task that you can complete yourself. It's important to do this correctly in order to ensure safety and functionality.
Begin by opening the window a bit in this in a way, and then keep the handle in an open position. With a screwdriver, take out the screws on the top and bottom of the handle. Then move the handle to the unlocked/open position and put the new screw in. The spindle of the new handle should be put into the lock mechanism in the same manner as the handle from the previous one was. (A small test can be easily conducted by dropping something in the middle hole to check how deep it goes).
Once the handle has been fitted then replace the screw caps, making sure not to lose them. Verify that the window handle is functioning by transferring it between the locked and unlocked positions several times.
Window handles are an essential component of all uPVC windows, and they may become worn out or even break as time passes. If this happens, it's crucial that you replace the broken window handle as soon as you can to prevent security risks and ensure that your windows function correctly. If you need a replacement window handle for your home Contact Bridgewater Glass today and our expert team will be happy to help. Our team has many years of experience working with uPVC and we're confident that we can provide the right solution for your requirements.